Custom Frame Bags
Our custom line is designed for the most demanding cyclists, for those who need to make the most of every centimeter of their bicycle. Even in custom bags we pay attention to the different needs of use with two types of products: Internode Custom Road/gravel and Internode Custom Adventure.
220.00€
Introduction
Our custom line is designed for the most demanding cyclists, for those who need to make the most of every centimeter of their bicycle. Even in custom bags we pay attention to the different needs of use with two types of products: Internode Custom Road/gravel and Internode Custom Adventure.
Internode Custom Road/Gravel (ZIP)
The image is purely indicative and may not fully reflect the characteristics of the product.
- Ultralight bag with ZIP closure system ;
- allows you to access the bag very quickly, both when opening and closing;
- The width of the bag is 5 cm so as not to hinder pedaling;
- Bag with a ZIP (1 zip on the right side) : the bag has an internal vertical divider. Available for small bags;
- Bag with 2 ZIPs (2 zips on the right side): the bag has an internal horizontal divider;
- Bag with 3 ZIPs (2 zips on the right side and 1 zip on the left side) : the bag has an internal horizontal divider. Only large frames available;
- An internal vertical/horizontal divider divides the bag in two. If necessary, it can be removed (for example if you need to insert tent poles or a water bottle);
- Two (2) reflective side bands to be more visible and for safety when cycling at night or with poor visibility;
- It is possible to insert a water bag (not supplied).
Internode Custom Adventure (ROLL)
The image is purely indicative and may not fully reflect the characteristics of the product.
- Ultra-resistant bag with ROLL closure system;
- The width of the bag is 6 cm so as not to hinder pedaling;
- The Roll closure system completely eliminates zip durability problems, making the bag practically indestructible;
- Thanks to the access mouth larger than that of a zip system, it allows greater ease of access both for taking and storing objects;
- Significantly increases waterproofness;
- although the opening and closing operation is slower than opening a zip, filling the bag will be quicker and easier;
- The Roll system makes the volume of the bag modular. A need that often arises during a multi-day adventure;
- an internal vertical divider divides the bag in two. If necessary, it can be removed (for example if you need to insert tent poles or a water bottle;
- Two (2) reflective side bands to be more visible and for safety when cycling at night or with poor visibility;
- It is possible to insert a water bag (not supplied).
What do you need
Your bicycle
A ruler or tape measure
Camera or mobile phone
1st Step - Prepare the bike
First, take your bicycle and place it against a wall (preferably white or light and uniform so that the shape does not confuse us with the background).
- The bike must be photographed on the side of the crankset (gear side);
- The bicycle must be upright;
- Make sure you are in a well-lit environment;
- The orientation of the photo must be perpendicular to the bike. Photograph while sitting or crouching (see photo step 2);
- For FULL FRAME bag : Remove water bottles, bottle cages and any other accessories attached inside the triangle (such as a pump);
- For PARTIAL bag : leave mounted water bottles that you want to integrate with the bag to show the bulk;
- For both solutions, leave any other bags mounted (for example the Top Tube and down tube bags) so that the fixing points can be seen and can be integrated with those of the bag under construction.
2nd Step - Position yourself
Now, stand about 2 meters away from the bike.
3rd Step - Take 1 full photo of the bike
Take the first photo where you can see the entire bicycle and the reference meter positioned in the horizontal tube.
PS. No wide angle photos.
4th Step - Take 1 photo of the triangle
Take the second photo where you can see the entire triangle and the reference meter positioned in the horizontal tube.
No wheels, handlebars and saddle.
PS. No wide angle photos.
Times & Costs
A project created with precision and quality, especially 100% made in Italy , requires time and skill.
The production time of the bag can be around 20/40 days also depending on the season.
The price* is :
€220 – bag with a ZIP or ROLL;
€235 – bag with two ZIPs;
€250 – bag with three ZIPs;
€295 – bag with MAGNETIC closure.
*Shipping costs excluded.
Shipping costs within the national territory are €4.90.
Shipping costs within the EU are €14.90.
Shipping costs outside the EU are calculated based on the country of destination.
For special requests, extra costs may be added.
Below you can see some examples of creations.
